• Wie letztes Jahr von einigen gewünscht, hier eine Erinnerung zur Unterstützung.
  • Hallo zusammen, bitte prüft mal die im Forum hinterlegte Mail Adresse auf Aktualität. Es ist jetzt schon mehrfach passiert, dass Mails (z.B. für Benachrichtigung neuer PNs) nicht zugestellt werden konnten, weil die Konten nicht mehr existieren oder voll gelaufen sind. Danke!
  • Hallo Gast, falls du dich wunderst, wieso Bilder und Videos nicht mehr sofort angezeigt werden, schau mal hier.

Switch Nintendo Labo

Will das meinem Sohn auf Weihnachten schenken (jaja, mich interessiert es auch ;)), kann er da mit 3 1/2 schon was mit anfangen? Wie fest sitzt die Switch in der Kartonage? Muss ich da Angst haben das mir die Konsole durchs Zimmer fliegt oder ist das gut geschützt. Welches Packet ist das beste/einfachste?
 
Das Car Pack ist noch unausgepackt, da wir noch keine Zeit hatten das roboter Pack zu Ende zu bauen. Machen das immer in kleinen Schritten und dann kommen aber andere bastel arbeiten und das bauen von lego Sets und und und dazwischen ;)

Das Robo Set auf jeden Fall nicht.

Das Set mit den mehreren Sachen fetzt allerdings. Kind hilft beim drückend der Anleitung und beim Bauen. Bei der letzten Session ging das fast alleine, dauerte dann aber halt auch etwas länger (gleiches gilt für Lego). Spielerisch ist es auch am abwechslungsreichsten.

Die Switch wird immer direkt eingespannt, kann da auch nicht so ohne weiteres raus. Rumschmeissen sollte man die Sachen aber dennoch nicht.
 
da wir noch keine Zeit hatten das roboter Pack zu Ende zu bauen
Letzte Woche dann gemacht. Ist ziemlich mächtig das Teil. Nur kurz das erste Spiel probiert danach, hat gefetzt. Sieht lustig aus der kleine Kerl mit dem Rucksack größer als sein eigener Rumpf :D


Gestern und Heute am Fahrzeuge-Set gebaut. Das Lenkrad ist fertig. Ziemlich cool! Wer sich nicht entscheiden kann, sollte sich das kaufen. Was in dem Lenkrad alles drin ist, Wahnsinn. Und dann funktioniert das so gut!

Das erste kleine Minispiel ist quasi Carrera fahren. Dafür braucht man nur das Fußpedal oder weitere Spieler nur einen Joycon. Gibt nur Gasgeben und dann halt auf Rundkursen fahren. Macht schon Laune.

Wenn man das Lenkrad fertig hat, kann man aber auch in die offene Spielwelt und dort rumfahren - später dann auch fliegen mit dem Joystick und tauchen mit dem Uboot. Die ist ziemlich groß imho. Hat einen sehr starken Pilot Wings Resort Flair. So wie das 3DS Spiel und die Insel von Wii Sports Resort. Gefällt mir wirklich gut und der kleine ist auch schon fleißig durch die Gegend gefahren, hat getankt, Bäume gefällt und Kühe gesammelt.
 

Combining the innovative physical and digital gameplay of Nintendo Labo with basic VR technology, Nintendo Labo: VR Kit introduces virtual reality in a unique and approachable way. The Toy-Con Wind Pedal produces a blast of air to create the feeling of flying, while the Toy-Con Blaster slides and clicks before it launches a volley of lasers (or fruit). Players can make different DIY cardboard creations like a Toy-Con Elephant or a Toy-Con Camera; play a variety of VR games and experiences with these creations; and discover how it all works – or even design their own bite-sized VR experiences with the included programming tools.

“Nintendo Labo is inherently designed to encourage imagination and creativity in people of all ages by blending real-world and virtual experiences,” said Doug Bowser, Nintendo of America’s Senior Vice President of Sales and Marketing. “This new kit takes that concept a step further by layering in virtual reality to bring the Toy-Con creations to life and encourage family-friendly, pass-and-play experiences.”

All the games and experiences in Nintendo Labo: VR Kit are designed to be shareable, fun and social. By alternating turns, everyone in the room can watch and enjoy players’ reactions and join in the fun. Some games even allow players who aren’t looking into the Toy-Con VR Goggles to interact with the on-screen experience. For example, if one player is exploring the in-game ocean and taking photos with the Toy-Con Camera, another person in the room can wear the Toy-Con Snorkel and step in front of the Camera to make a bug-eyed fish swim quickly toward the player’s face – the reaction is priceless!

The Nintendo Labo: VR Kit offers a variety of games and experiences that work with the different Toy-Con creations, including:

  • Ocean Camera (Toy-Con Camera): Dive into the deep blue virtual sea and complete objectives like taking photos of sea life. The ocean is full of surprises.
  • House Camera (Toy-Con Camera): Interact with the strange creature living in the house – which some people may recognize from the Nintendo Labo: Variety Kit! – and complete missions by taking photos in its mysterious home.
  • Marble Run (Toy-Con Elephant): Try to complete physics puzzles by using various objects to guide marbles through rings. You can even create puzzles of your own to challenge friends and family.
  • Doodle (Toy-Con Elephant): Create colorful 3D artwork by moving the trunk of the Toy-Con Elephant through the air, using various in-game tools and styles to bring your creations to life. Once finished, show off your masterpieces on the TV by docking your Nintendo Switch. An additional multiplayer game lets you take turns drawing and guessing each other’s drawings.
  • Bird (Toy-Con Bird): Soar through the sky on a bird’s back, collecting items and helping baby birds hatch along the way. Players flap the wings of the Toy-Con Bird to fly and simply tilt it to turn.
  • Bird Dash (Toy-Con Bird, Toy-Con Wind Pedal): Compete in timed challenges by racing through checkpoints as you fly through the sky. The Toy-Con Wind Pedal is used in conjunction with the Toy-Con Bird to deliver an extra boost of speed, while also sending a surprisingly strong puff of air toward the player that enhances the sense of flying.
  • Blaster (Toy-Con Blaster): Battle an alien invasion and giant bosses in an on-rails experience that requires sharp reflexes and a keen eye.
  • Kablasta (Toy-Con Blaster): Challenge a friend to competitive hippo feeding. Yes, hippo feeding! Fling different types of fruit toward the hippos to lure them to your side of the pool and score the most points.
  • Hop Dodge (Toy-Con Wind Pedal): As a frog, jump as high as you can on an ever-growing stack of balls while avoiding obstacles and heading soccer balls. The wind resistance from the Wind Pedal will make you feel as though you’re actually experiencing a breeze.
  • VR Plaza (all Toy-Con creations): Enjoy 64 bite-sized games and experiences in VR Plaza, including platformers and puzzlers. Many of these experiences can be enjoyed using only the Toy-Con VR Goggles and Nintendo Switch system.
Two programing tools are included with the Nintendo Labo: VR Kit software. Toy-Con Garage is the tool that is returning from previous kits and optimized for this kit’s Toy-Con creations. Toy-Con Garage VR is a new tool that allows players to create their own VR games and experiences. In fact, Toy-Con Garage VR is the tool that the development team used to create everything in VR Plaza. Players can even import VR Plaza games into Toy-Con Garage VR mode to discover how they work, customize the experiences or use them as inspiration to create a completely new game.

Nintendo Labo: VR Kit will launch in retail stores on April 12 with two primary configurations, one that includes all Toy-Con creations and one that includes a smaller selection of projects to get started:

  • Nintendo Labo: VR Kit: Available at a suggested retail price of $79.99, the complete Nintendo Labo: VR Kit includes the Nintendo Switch software and materials to build all six Toy-Con projects – the Toy-Con VR Goggles, Toy-Con Blaster, Toy-Con Camera, Toy-Con Bird, Toy-Con Wind Pedal and Toy-Con Elephant – as well as a Screen Holder and other accessories. It’s a good option for kids and families who want to dive into the full experience.
  • Nintendo Labo: VR Kit – Starter Set + Blaster: Available at a suggested retail price of only $39.99, the Starter Set includes the Nintendo Switch software, plus all the components to build the Toy-Con VR Goggles and Toy-Con Blaster, as well as the Screen Holder and other accessories. The Starter Set is a great entry point into the world of Nintendo Labo VR.

Sieht im Grunde ganz witzig aus und scheint tonnenweise Content zu haben. Und die Toy-Con Garage VR hat verdammt viel Potenzial. Ich hab nur Angst vor dem Augenkrebs, den der 720p/60Hz-Switch-Screen direkt vor meinen Augen verursachen wird...:eek:
 
Zurück
Oben